iPhone 16 Pro Max Full Screen (LTPS) PRIME: Onboard Intelligence & Diagnostic Compatibility

The LTPS PRIME full screen for iPhone 16 Pro Max is our compatible part equipped for Apple diagnostics. It features a programmed original IC (Diagnostic-Ready): the part is designed to communicate with Apple's Repair Assistant and qualify as a 'Recycled Part', whereas a standard compatible screen remains stuck as an 'Unknown Part'. This LTPS LCD panel reproduces the 120Hz of the 16 Pro Max, at an accessible price point, with some functional trade-offs detailed and acknowledged below.

The PRIME Advantage: Diagnostic-Ready and Zero IC Transplantation

PRIME technology is based on an original IC, reprogrammed and factory-soldered. In practical terms, it eliminates the riskiest step of a compatible installation on a recent iPhone: the transplantation of the customer's original IC via micro-soldering. What this changes in your workshop:

• Zero micro-soldering, zero IC transplantation: the programmed original IC is already in place. You eliminate 100% of micro-soldering operations and the associated risks (torn ribbon cable, thermal damage, dead IC).
• 'Recycled Part' qualification: in compliance with current iOS protocols, the screen passes the Repair Assistant and qualifies as a 'Recycled Part' in Settings > General > About > Parts and Service History, avoiding the 'Unknown Part' alert.
• Installation procedure on iPhone 16 Pro Max (important): on this generation, qualification requires transferring the original Sensor Flex from the customer's own phone onto the PRIME screen, then launching the Repair Assistant with the assembly installed. No IC transplantation is required, but the customer's original Sensor Flex remains necessary to validate the diagnostic. The 'Recycled Part' status only appears after launching the diagnostic, never upon simple installation.
• Case of unavailable, faulty, or non-original customer Sensor Flex: PRIME qualification on iPhone 16 Pro Max depends on a functional original Sensor Flex from the customer's phone. If it is damaged, missing, or already non-original, there is no valid original Sensor Flex to transfer: the diagnostic cannot validate the part. The screen functions normally (display and touch), but remains an 'Unknown Part', and the Sensor Flex remains a component to be treated separately. To obtain a 'Recycled Part' qualification regardless of the state of the customer's phone, look towards the ReLife + Sensor Flex range: it includes its own original Apple Sensor Flex and remains autonomous, without depending on the customer's Sensor Flex.
• Operational efficiency: by eliminating micro-soldering, you transform an expert intervention into a manageable and repeatable installation. You secure the ribbon cable, the skilled labour time, and, ultimately, your margin.

Hardware Features: LTPS 120Hz Technology

The iPhone 16 Pro Max is originally equipped with an OLED panel. The PRIME range here offers a 120Hz LTPS (Low Temperature PolySilicon) LCD panel, for controlled rendering at a contained cost:

• Sharp and bright display: LTPS technology ensures high pixel density, good brightness, and faithful colourimetry, at the best level of an LCD panel, with optimised outdoor readability.
• 120Hz refresh rate: this LTPS panel reproduces 120Hz on the iPhone 16 Pro Max, for fluid scrolling and high touch responsiveness. A professional point of vigilance: 120Hz on an aftermarket panel depends on the quality of the panel and the stability of the IC over time; our references are selected based on this durability criterion.
• LTPS backplane: low-temperature polycrystalline silicon offers better electronic mobility and fine backlight management, for a stable and homogeneous panel, including at high frequency.

Technical Transparency & Installation Precautions

The actual state of each function after installation, and the limits to be aware of:

• Always-On Display not supported: the Always-On display of the 16 Pro Max depends on the original LTPO OLED panel (idle at 1Hz). It is not supported on this LTPS conversion, regardless of the 120Hz reproduction.
• Automatic brightness not supported: on this LTPS panel (conversion from the original OLED), the LCD structure does not allow for reliable operation of the ambient light sensor. Automatic brightness is therefore not supported and must be adjusted manually by the user.
• Biometric integrity: full compatibility with the Face ID module is maintained during the transfer of the customer's original upper ribbon cable.
• iOS scalability: PRIME recognition is based on a programmed original IC, compliant with current iOS diagnostic protocols. As component history remains managed by Apple, the behaviour of screens with programmed ICs may evolve according to the manufacturer's future update policies. We monitor these developments closely.

PRIME Technical Specifications

• Screen type: Compatible LTPS LCD 120Hz (non-original). The iPhone 16 Pro Max is OLED originally
• Panel: LTPS (Low Temperature PolySilicon), LCD
• Refresh rate: 120Hz
• Always-On Display: Not supported (depends on the original LTPO panel)
• IC: Programmed original IC (Diagnostic-Ready), factory-soldered, without transplantation or micro-soldering
• iOS recognition (Repair Assistant): Passes diagnostic, qualified as 'Recycled Part' (on iPhone 16 Pro Max, subject to the transfer of the customer's original Sensor Flex)
• iPhone 16 Pro Max installation procedure: Transfer of the customer's original Sensor Flex, then diagnostic launched with the assembly installed. Status displayed after diagnostic, not upon installation
• Automatic brightness: Not supported (ambient light sensor not reliable on LTPS conversion), manual adjustment
• Face ID: Maintained (transfer of the customer's original upper ribbon cable)
• Scalability: Behaviour dependent on Apple's iOS update policies, subject to change